…and MeshStandardMaterial
MeshStandardMaterial Vertex Shader
precision highp float;
precision highp int;
#define SHADER_NAME MeshStandardMaterial
#define STANDARD
#define VERTEX_TEXTURES
#define GAMMA_FACTOR 2.2
#define MAX_BONES 0
#define USE_COLOR
#define FLAT_SHADED
#define BONE_TEXTURE
#define USE_MORPHTARGETS
uniform mat4 modelMatrix;
uniform mat4 modelViewMatrix;
uniform mat4 projectionMatrix;
uniform mat4 viewMatrix;
uniform mat3 normalMatrix;
uniform vec3 cameraPosition;
attribute vec3 position;
attribute vec3 normal;
attribute vec2 uv;
#ifdef USE_TANGENT
attribute vec4 tangent;
#endif
#ifdef USE_COLOR
attribute vec3 color;
#endif
#ifdef USE_MORPHTARGETS
attribute vec3 morphTarget0;
attribute vec3 morphTarget1;
attribute vec3 morphTarget2;
attribute vec3 morphTarget3;
#ifdef USE_MORPHNORMALS
attribute vec3 morphNormal0;
attribute vec3 morphNormal1;
attribute vec3 morphNormal2;
attribute vec3 morphNormal3;
#else
attribute vec3 morphTarget4;
attribute vec3 morphTarget5;
attribute vec3 morphTarget6;
attribute vec3 morphTarget7;
#endif
#endif
#ifdef USE_SKINNING
attribute vec4 skinIndex;
attribute vec4 skinWeight;
#endif
#define PHYSICAL
varying vec3 vViewPosition;
#ifndef FLAT_SHADED
varying vec3 vNormal;
#ifdef USE_TANGENT
varying vec3 vTangent;
varying vec3 vBitangent;
#endif
#endif
#define PI 3.14159265359
#define PI2 6.28318530718
#define PI_HALF 1.5707963267949
#define RECIPROCAL_PI 0.31830988618
#define RECIPROCAL_PI2 0.15915494
#define LOG2 1.442695
#define EPSILON 1e-6
#define saturate(a) clamp( a, 0.0, 1.0 )
#define whiteCompliment(a) ( 1.0 - saturate( a ) )
float pow2( const in float x ) {
return x*x;
}
float pow3( const in float x ) {
return x*x*x;
}
float pow4( const in float x ) {
float x2 = x*x;
return x2*x2;
}
float average( const in vec3 color ) {
return dot( color, vec3( 0.3333 ) );
}
highp float rand( const in vec2 uv ) {
const highp float a = 12.9898, b = 78.233, c = 43758.5453;
highp float dt = dot( uv.xy, vec2( a, b ) ), sn = mod( dt, PI );
return fract(sin(sn) * c);
}
struct IncidentLight {
vec3 color;
vec3 direction;
bool visible;
};
struct ReflectedLight {
vec3 directDiffuse;
vec3 directSpecular;
vec3 indirectDiffuse;
vec3 indirectSpecular;
};
struct GeometricContext {
vec3 position;
vec3 normal;
vec3 viewDir;
};
vec3 transformDirection( in vec3 dir, in mat4 matrix ) {
return normalize( ( matrix * vec4( dir, 0.0 ) ).xyz );
}
vec3 inverseTransformDirection( in vec3 dir, in mat4 matrix ) {
return normalize( ( vec4( dir, 0.0 ) * matrix ).xyz );
}
vec3 projectOnPlane(in vec3 point, in vec3 pointOnPlane, in vec3 planeNormal ) {
float distance = dot( planeNormal, point - pointOnPlane );
return - distance * planeNormal + point;
}
float sideOfPlane( in vec3 point, in vec3 pointOnPlane, in vec3 planeNormal ) {
return sign( dot( point - pointOnPlane, planeNormal ) );
}
vec3 linePlaneIntersect( in vec3 pointOnLine, in vec3 lineDirection, in vec3 pointOnPlane, in vec3 planeNormal ) {
return lineDirection * ( dot( planeNormal, pointOnPlane - pointOnLine ) / dot( planeNormal, lineDirection ) ) + pointOnLine;
}
mat3 transposeMat3( const in mat3 m ) {
mat3 tmp;
tmp[ 0 ] = vec3( m[ 0 ].x, m[ 1 ].x, m[ 2 ].x );
tmp[ 1 ] = vec3( m[ 0 ].y, m[ 1 ].y, m[ 2 ].y );
tmp[ 2 ] = vec3( m[ 0 ].z, m[ 1 ].z, m[ 2 ].z );
return tmp;
}
float linearToRelativeLuminance( const in vec3 color ) {
vec3 weights = vec3( 0.2126, 0.7152, 0.0722 );
return dot( weights, color.rgb );
}
#if defined( USE_MAP ) || defined( USE_BUMPMAP ) || defined( USE_NORMALMAP ) || defined( USE_SPECULARMAP ) || defined( USE_ALPHAMAP ) || defined( USE_EMISSIVEMAP ) || defined( USE_ROUGHNESSMAP ) || defined( USE_METALNESSMAP )
varying vec2 vUv;
uniform mat3 uvTransform;
#endif
#if defined( USE_LIGHTMAP ) || defined( USE_AOMAP )
attribute vec2 uv2;
varying vec2 vUv2;
#endif
#ifdef USE_DISPLACEMENTMAP
uniform sampler2D displacementMap;
uniform float displacementScale;
uniform float displacementBias;
#endif
#ifdef USE_COLOR
varying vec3 vColor;
#endif
#ifdef USE_FOG
varying float fogDepth;
#endif
#ifdef USE_MORPHTARGETS
#ifndef USE_MORPHNORMALS
uniform float morphTargetInfluences[ 8 ];
#else
uniform float morphTargetInfluences[ 4 ];
#endif
#endif
#ifdef USE_SKINNING
uniform mat4 bindMatrix;
uniform mat4 bindMatrixInverse;
#ifdef BONE_TEXTURE
uniform sampler2D boneTexture;
uniform int boneTextureSize;
mat4 getBoneMatrix( const in float i ) {
float j = i * 4.0;
float x = mod( j, float( boneTextureSize ) );
float y = floor( j / float( boneTextureSize ) );
float dx = 1.0 / float( boneTextureSize );
float dy = 1.0 / float( boneTextureSize );
y = dy * ( y + 0.5 );
vec4 v1 = texture2D( boneTexture, vec2( dx * ( x + 0.5 ), y ) );
vec4 v2 = texture2D( boneTexture, vec2( dx * ( x + 1.5 ), y ) );
vec4 v3 = texture2D( boneTexture, vec2( dx * ( x + 2.5 ), y ) );
vec4 v4 = texture2D( boneTexture, vec2( dx * ( x + 3.5 ), y ) );
mat4 bone = mat4( v1, v2, v3, v4 );
return bone;
}
#else
uniform mat4 boneMatrices[ MAX_BONES ];
mat4 getBoneMatrix( const in float i ) {
mat4 bone = boneMatrices[ int(i) ];
return bone;
}
#endif
#endif
#ifdef USE_SHADOWMAP
#if 1 > 0
uniform mat4 directionalShadowMatrix[ 1 ];
varying vec4 vDirectionalShadowCoord[ 1 ];
#endif
#if 0 > 0
uniform mat4 spotShadowMatrix[ 0 ];
varying vec4 vSpotShadowCoord[ 0 ];
#endif
#if 0 > 0
uniform mat4 pointShadowMatrix[ 0 ];
varying vec4 vPointShadowCoord[ 0 ];
#endif
#endif
#ifdef USE_LOGDEPTHBUF
#ifdef USE_LOGDEPTHBUF_EXT
varying float vFragDepth;
#else
uniform float logDepthBufFC;
#endif
#endif
#if 0 > 0 && ! defined( PHYSICAL ) && ! defined( PHONG ) && ! defined( MATCAP )
varying vec3 vViewPosition;
#endif
void main() {
#if defined( USE_MAP ) || defined( USE_BUMPMAP ) || defined( USE_NORMALMAP ) || defined( USE_SPECULARMAP ) || defined( USE_ALPHAMAP ) || defined( USE_EMISSIVEMAP ) || defined( USE_ROUGHNESSMAP ) || defined( USE_METALNESSMAP )
vUv = ( uvTransform * vec3( uv, 1 ) ).xy;
#endif
#if defined( USE_LIGHTMAP ) || defined( USE_AOMAP )
vUv2 = uv2;
#endif
#ifdef USE_COLOR
vColor.xyz = color.xyz;
#endif
vec3 objectNormal = vec3( normal );
#ifdef USE_TANGENT
vec3 objectTangent = vec3( tangent.xyz );
#endif
#ifdef USE_MORPHNORMALS
objectNormal += ( morphNormal0 - normal ) * morphTargetInfluences[ 0 ];
objectNormal += ( morphNormal1 - normal ) * morphTargetInfluences[ 1 ];
objectNormal += ( morphNormal2 - normal ) * morphTargetInfluences[ 2 ];
objectNormal += ( morphNormal3 - normal ) * morphTargetInfluences[ 3 ];
#endif
#ifdef USE_SKINNING
mat4 boneMatX = getBoneMatrix( skinIndex.x );
mat4 boneMatY = getBoneMatrix( skinIndex.y );
mat4 boneMatZ = getBoneMatrix( skinIndex.z );
mat4 boneMatW = getBoneMatrix( skinIndex.w );
#endif
#ifdef USE_SKINNING
mat4 skinMatrix = mat4( 0.0 );
skinMatrix += skinWeight.x * boneMatX;
skinMatrix += skinWeight.y * boneMatY;
skinMatrix += skinWeight.z * boneMatZ;
skinMatrix += skinWeight.w * boneMatW;
skinMatrix = bindMatrixInverse * skinMatrix * bindMatrix;
objectNormal = vec4( skinMatrix * vec4( objectNormal, 0.0 ) ).xyz;
#ifdef USE_TANGENT
objectTangent = vec4( skinMatrix * vec4( objectTangent, 0.0 ) ).xyz;
#endif
#endif
vec3 transformedNormal = normalMatrix * objectNormal;
#ifdef FLIP_SIDED
transformedNormal = - transformedNormal;
#endif
#ifdef USE_TANGENT
vec3 transformedTangent = normalMatrix * objectTangent;
#ifdef FLIP_SIDED
transformedTangent = - transformedTangent;
#endif
#endif
#ifndef FLAT_SHADED
vNormal = normalize( transformedNormal );
#ifdef USE_TANGENT
vTangent = normalize( transformedTangent );
vBitangent = normalize( cross( vNormal, vTangent ) * tangent.w );
#endif
#endif
vec3 transformed = vec3( position );
#ifdef USE_MORPHTARGETS
transformed += ( morphTarget0 - position ) * morphTargetInfluences[ 0 ];
transformed += ( morphTarget1 - position ) * morphTargetInfluences[ 1 ];
transformed += ( morphTarget2 - position ) * morphTargetInfluences[ 2 ];
transformed += ( morphTarget3 - position ) * morphTargetInfluences[ 3 ];
#ifndef USE_MORPHNORMALS
transformed += ( morphTarget4 - position ) * morphTargetInfluences[ 4 ];
transformed += ( morphTarget5 - position ) * morphTargetInfluences[ 5 ];
transformed += ( morphTarget6 - position ) * morphTargetInfluences[ 6 ];
transformed += ( morphTarget7 - position ) * morphTargetInfluences[ 7 ];
#endif
#endif
#ifdef USE_SKINNING
vec4 skinVertex = bindMatrix * vec4( transformed, 1.0 );
vec4 skinned = vec4( 0.0 );
skinned += boneMatX * skinVertex * skinWeight.x;
skinned += boneMatY * skinVertex * skinWeight.y;
skinned += boneMatZ * skinVertex * skinWeight.z;
skinned += boneMatW * skinVertex * skinWeight.w;
transformed = ( bindMatrixInverse * skinned ).xyz;
#endif
#ifdef USE_DISPLACEMENTMAP
transformed += normalize( objectNormal ) * ( texture2D( displacementMap, uv ).x * displacementScale + displacementBias );
#endif
vec4 mvPosition = modelViewMatrix * vec4( transformed, 1.0 );
gl_Position = projectionMatrix * mvPosition;
#ifdef USE_LOGDEPTHBUF
#ifdef USE_LOGDEPTHBUF_EXT
vFragDepth = 1.0 + gl_Position.w;
#else
gl_Position.z = log2( max( EPSILON, gl_Position.w + 1.0 ) ) * logDepthBufFC - 1.0;
gl_Position.z *= gl_Position.w;
#endif
#endif
#if 0 > 0 && ! defined( PHYSICAL ) && ! defined( PHONG ) && ! defined( MATCAP )
vViewPosition = - mvPosition.xyz;
#endif
vViewPosition = - mvPosition.xyz;
#if defined( USE_ENVMAP ) || defined( DISTANCE ) || defined ( USE_SHADOWMAP )
vec4 worldPosition = modelMatrix * vec4( transformed, 1.0 );
#endif
#ifdef USE_SHADOWMAP
#if 1 > 0
vDirectionalShadowCoord[ 0 ] = directionalShadowMatrix[ 0 ] * worldPosition;
#endif
#if 0 > 0
#endif
#if 0 > 0
#endif
#endif
#ifdef USE_FOG
fogDepth = -mvPosition.z;
#endif
}
MeshStandardMaterial Fragment Shader
#extension GL_OES_standard_derivatives : enable
precision highp float;
precision highp int;
#define SHADER_NAME MeshStandardMaterial
#define STANDARD
#define GAMMA_FACTOR 2.2
#define USE_COLOR
#define FLAT_SHADED
#define PHYSICALLY_CORRECT_LIGHTS
uniform mat4 viewMatrix;
uniform vec3 cameraPosition;
#define TONE_MAPPING
#ifndef saturate
#define saturate(a) clamp( a, 0.0, 1.0 )
#endif
uniform float toneMappingExposure;
uniform float toneMappingWhitePoint;
vec3 LinearToneMapping( vec3 color ) {
return toneMappingExposure * color;
}
vec3 ReinhardToneMapping( vec3 color ) {
color *= toneMappingExposure;
return saturate( color / ( vec3( 1.0 ) + color ) );
}
#define Uncharted2Helper( x ) max( ( ( x * ( 0.15 * x + 0.10 * 0.50 ) + 0.20 * 0.02 ) / ( x * ( 0.15 * x + 0.50 ) + 0.20 * 0.30 ) ) - 0.02 / 0.30, vec3( 0.0 ) )
vec3 Uncharted2ToneMapping( vec3 color ) {
color *= toneMappingExposure;
return saturate( Uncharted2Helper( color ) / Uncharted2Helper( vec3( toneMappingWhitePoint ) ) );
}
vec3 OptimizedCineonToneMapping( vec3 color ) {
color *= toneMappingExposure;
color = max( vec3( 0.0 ), color - 0.004 );
return pow( ( color * ( 6.2 * color + 0.5 ) ) / ( color * ( 6.2 * color + 1.7 ) + 0.06 ), vec3( 2.2 ) );
}
vec3 ACESFilmicToneMapping( vec3 color ) {
color *= toneMappingExposure;
return saturate( ( color * ( 2.51 * color + 0.03 ) ) / ( color * ( 2.43 * color + 0.59 ) + 0.14 ) );
}
vec3 toneMapping( vec3 color ) {
return ACESFilmicToneMapping( color );
}
vec4 LinearToLinear( in vec4 value ) {
return value;
}
vec4 GammaToLinear( in vec4 value, in float gammaFactor ) {
return vec4( pow( value.rgb, vec3( gammaFactor ) ), value.a );
}
vec4 LinearToGamma( in vec4 value, in float gammaFactor ) {
return vec4( pow( value.rgb, vec3( 1.0 / gammaFactor ) ), value.a );
}
vec4 sRGBToLinear( in vec4 value ) {
return vec4( mix( pow( value.rgb * 0.9478672986 + vec3( 0.0521327014 ), vec3( 2.4 ) ), value.rgb * 0.0773993808, vec3( lessThanEqual( value.rgb, vec3( 0.04045 ) ) ) ), value.a );
}
vec4 LinearTosRGB( in vec4 value ) {
return vec4( mix( pow( value.rgb, vec3( 0.41666 ) ) * 1.055 - vec3( 0.055 ), value.rgb * 12.92, vec3( lessThanEqual( value.rgb, vec3( 0.0031308 ) ) ) ), value.a );
}
vec4 RGBEToLinear( in vec4 value ) {
return vec4( value.rgb * exp2( value.a * 255.0 - 128.0 ), 1.0 );
}
vec4 LinearToRGBE( in vec4 value ) {
float maxComponent = max( max( value.r, value.g ), value.b );
float fExp = clamp( ceil( log2( maxComponent ) ), -128.0, 127.0 );
return vec4( value.rgb / exp2( fExp ), ( fExp + 128.0 ) / 255.0 );
}
vec4 RGBMToLinear( in vec4 value, in float maxRange ) {
return vec4( value.rgb * value.a * maxRange, 1.0 );
}
vec4 LinearToRGBM( in vec4 value, in float maxRange ) {
float maxRGB = max( value.r, max( value.g, value.b ) );
float M = clamp( maxRGB / maxRange, 0.0, 1.0 );
M = ceil( M * 255.0 ) / 255.0;
return vec4( value.rgb / ( M * maxRange ), M );
}
vec4 RGBDToLinear( in vec4 value, in float maxRange ) {
return vec4( value.rgb * ( ( maxRange / 255.0 ) / value.a ), 1.0 );
}
vec4 LinearToRGBD( in vec4 value, in float maxRange ) {
float maxRGB = max( value.r, max( value.g, value.b ) );
float D = max( maxRange / maxRGB, 1.0 );
D = min( floor( D ) / 255.0, 1.0 );
return vec4( value.rgb * ( D * ( 255.0 / maxRange ) ), D );
}
const mat3 cLogLuvM = mat3( 0.2209, 0.3390, 0.4184, 0.1138, 0.6780, 0.7319, 0.0102, 0.1130, 0.2969 );
vec4 LinearToLogLuv( in vec4 value ) {
vec3 Xp_Y_XYZp = cLogLuvM * value.rgb;
Xp_Y_XYZp = max( Xp_Y_XYZp, vec3( 1e-6, 1e-6, 1e-6 ) );
vec4 vResult;
vResult.xy = Xp_Y_XYZp.xy / Xp_Y_XYZp.z;
float Le = 2.0 * log2(Xp_Y_XYZp.y) + 127.0;
vResult.w = fract( Le );
vResult.z = ( Le - ( floor( vResult.w * 255.0 ) ) / 255.0 ) / 255.0;
return vResult;
}
const mat3 cLogLuvInverseM = mat3( 6.0014, -2.7008, -1.7996, -1.3320, 3.1029, -5.7721, 0.3008, -1.0882, 5.6268 );
vec4 LogLuvToLinear( in vec4 value ) {
float Le = value.z * 255.0 + value.w;
vec3 Xp_Y_XYZp;
Xp_Y_XYZp.y = exp2( ( Le - 127.0 ) / 2.0 );
Xp_Y_XYZp.z = Xp_Y_XYZp.y / value.y;
Xp_Y_XYZp.x = value.x * Xp_Y_XYZp.z;
vec3 vRGB = cLogLuvInverseM * Xp_Y_XYZp.rgb;
return vec4( max( vRGB, 0.0 ), 1.0 );
}
vec4 mapTexelToLinear( vec4 value ) {
return LinearToLinear( value );
}
vec4 matcapTexelToLinear( vec4 value ) {
return LinearToLinear( value );
}
vec4 envMapTexelToLinear( vec4 value ) {
return LinearToLinear( value );
}
vec4 emissiveMapTexelToLinear( vec4 value ) {
return LinearToLinear( value );
}
vec4 linearToOutputTexel( vec4 value ) {
return LinearToGamma( value, float( GAMMA_FACTOR ) );
}
#define PHYSICAL
uniform vec3 diffuse;
uniform vec3 emissive;
uniform float roughness;
uniform float metalness;
uniform float opacity;
#ifndef STANDARD
uniform float clearCoat;
uniform float clearCoatRoughness;
#endif
varying vec3 vViewPosition;
#ifndef FLAT_SHADED
varying vec3 vNormal;
#ifdef USE_TANGENT
varying vec3 vTangent;
varying vec3 vBitangent;
#endif
#endif
#define PI 3.14159265359
#define PI2 6.28318530718
#define PI_HALF 1.5707963267949
#define RECIPROCAL_PI 0.31830988618
#define RECIPROCAL_PI2 0.15915494
#define LOG2 1.442695
#define EPSILON 1e-6
#define saturate(a) clamp( a, 0.0, 1.0 )
#define whiteCompliment(a) ( 1.0 - saturate( a ) )
float pow2( const in float x ) {
return x*x;
}
float pow3( const in float x ) {
return x*x*x;
}
float pow4( const in float x ) {
float x2 = x*x;
return x2*x2;
}
float average( const in vec3 color ) {
return dot( color, vec3( 0.3333 ) );
}
highp float rand( const in vec2 uv ) {
const highp float a = 12.9898, b = 78.233, c = 43758.5453;
highp float dt = dot( uv.xy, vec2( a, b ) ), sn = mod( dt, PI );
return fract(sin(sn) * c);
}
struct IncidentLight {
vec3 color;
vec3 direction;
bool visible;
};
struct ReflectedLight {
vec3 directDiffuse;
vec3 directSpecular;
vec3 indirectDiffuse;
vec3 indirectSpecular;
};
struct GeometricContext {
vec3 position;
vec3 normal;
vec3 viewDir;
};
vec3 transformDirection( in vec3 dir, in mat4 matrix ) {
return normalize( ( matrix * vec4( dir, 0.0 ) ).xyz );
}
vec3 inverseTransformDirection( in vec3 dir, in mat4 matrix ) {
return normalize( ( vec4( dir, 0.0 ) * matrix ).xyz );
}
vec3 projectOnPlane(in vec3 point, in vec3 pointOnPlane, in vec3 planeNormal ) {
float distance = dot( planeNormal, point - pointOnPlane );
return - distance * planeNormal + point;
}
float sideOfPlane( in vec3 point, in vec3 pointOnPlane, in vec3 planeNormal ) {
return sign( dot( point - pointOnPlane, planeNormal ) );
}
vec3 linePlaneIntersect( in vec3 pointOnLine, in vec3 lineDirection, in vec3 pointOnPlane, in vec3 planeNormal ) {
return lineDirection * ( dot( planeNormal, pointOnPlane - pointOnLine ) / dot( planeNormal, lineDirection ) ) + pointOnLine;
}
mat3 transposeMat3( const in mat3 m ) {
mat3 tmp;
tmp[ 0 ] = vec3( m[ 0 ].x, m[ 1 ].x, m[ 2 ].x );
tmp[ 1 ] = vec3( m[ 0 ].y, m[ 1 ].y, m[ 2 ].y );
tmp[ 2 ] = vec3( m[ 0 ].z, m[ 1 ].z, m[ 2 ].z );
return tmp;
}
float linearToRelativeLuminance( const in vec3 color ) {
vec3 weights = vec3( 0.2126, 0.7152, 0.0722 );
return dot( weights, color.rgb );
}
vec3 packNormalToRGB( const in vec3 normal ) {
return normalize( normal ) * 0.5 + 0.5;
}
vec3 unpackRGBToNormal( const in vec3 rgb ) {
return 2.0 * rgb.xyz - 1.0;
}
const float PackUpscale = 256. / 255.;
const float UnpackDownscale = 255. / 256.;
const vec3 PackFactors = vec3( 256. * 256. * 256., 256. * 256., 256. );
const vec4 UnpackFactors = UnpackDownscale / vec4( PackFactors, 1. );
const float ShiftRight8 = 1. / 256.;
vec4 packDepthToRGBA( const in float v ) {
vec4 r = vec4( fract( v * PackFactors ), v );
r.yzw -= r.xyz * ShiftRight8;
return r * PackUpscale;
}
float unpackRGBAToDepth( const in vec4 v ) {
return dot( v, UnpackFactors );
}
float viewZToOrthographicDepth( const in float viewZ, const in float near, const in float far ) {
return ( viewZ + near ) / ( near - far );
}
float orthographicDepthToViewZ( const in float linearClipZ, const in float near, const in float far ) {
return linearClipZ * ( near - far ) - near;
}
float viewZToPerspectiveDepth( const in float viewZ, const in float near, const in float far ) {
return (( near + viewZ ) * far ) / (( far - near ) * viewZ );
}
float perspectiveDepthToViewZ( const in float invClipZ, const in float near, const in float far ) {
return ( near * far ) / ( ( far - near ) * invClipZ - far );
}
#if defined( DITHERING )
vec3 dithering( vec3 color ) {
float grid_position = rand( gl_FragCoord.xy );
vec3 dither_shift_RGB = vec3( 0.25 / 255.0, -0.25 / 255.0, 0.25 / 255.0 );
dither_shift_RGB = mix( 2.0 * dither_shift_RGB, -2.0 * dither_shift_RGB, grid_position );
return color + dither_shift_RGB;
}
#endif
#ifdef USE_COLOR
varying vec3 vColor;
#endif
#if defined( USE_MAP ) || defined( USE_BUMPMAP ) || defined( USE_NORMALMAP ) || defined( USE_SPECULARMAP ) || defined( USE_ALPHAMAP ) || defined( USE_EMISSIVEMAP ) || defined( USE_ROUGHNESSMAP ) || defined( USE_METALNESSMAP )
varying vec2 vUv;
#endif
#if defined( USE_LIGHTMAP ) || defined( USE_AOMAP )
varying vec2 vUv2;
#endif
#ifdef USE_MAP
uniform sampler2D map;
#endif
#ifdef USE_ALPHAMAP
uniform sampler2D alphaMap;
#endif
#ifdef USE_AOMAP
uniform sampler2D aoMap;
uniform float aoMapIntensity;
#endif
#ifdef USE_LIGHTMAP
uniform sampler2D lightMap;
uniform float lightMapIntensity;
#endif
#ifdef USE_EMISSIVEMAP
uniform sampler2D emissiveMap;
#endif
vec2 integrateSpecularBRDF( const in float dotNV, const in float roughness ) {
const vec4 c0 = vec4( - 1, - 0.0275, - 0.572, 0.022 );
const vec4 c1 = vec4( 1, 0.0425, 1.04, - 0.04 );
vec4 r = roughness * c0 + c1;
float a004 = min( r.x * r.x, exp2( - 9.28 * dotNV ) ) * r.x + r.y;
return vec2( -1.04, 1.04 ) * a004 + r.zw;
}
float punctualLightIntensityToIrradianceFactor( const in float lightDistance, const in float cutoffDistance, const in float decayExponent ) {
#if defined ( PHYSICALLY_CORRECT_LIGHTS )
float distanceFalloff = 1.0 / max( pow( lightDistance, decayExponent ), 0.01 );
if( cutoffDistance > 0.0 ) {
distanceFalloff *= pow2( saturate( 1.0 - pow4( lightDistance / cutoffDistance ) ) );
}
return distanceFalloff;
#else
if( cutoffDistance > 0.0 && decayExponent > 0.0 ) {
return pow( saturate( -lightDistance / cutoffDistance + 1.0 ), decayExponent );
}
return 1.0;
#endif
}
vec3 BRDF_Diffuse_Lambert( const in vec3 diffuseColor ) {
return RECIPROCAL_PI * diffuseColor;
}
vec3 F_Schlick( const in vec3 specularColor, const in float dotLH ) {
float fresnel = exp2( ( -5.55473 * dotLH - 6.98316 ) * dotLH );
return ( 1.0 - specularColor ) * fresnel + specularColor;
}
float G_GGX_Smith( const in float alpha, const in float dotNL, const in float dotNV ) {
float a2 = pow2( alpha );
float gl = dotNL + sqrt( a2 + ( 1.0 - a2 ) * pow2( dotNL ) );
float gv = dotNV + sqrt( a2 + ( 1.0 - a2 ) * pow2( dotNV ) );
return 1.0 / ( gl * gv );
}
float G_GGX_SmithCorrelated( const in float alpha, const in float dotNL, const in float dotNV ) {
float a2 = pow2( alpha );
float gv = dotNL * sqrt( a2 + ( 1.0 - a2 ) * pow2( dotNV ) );
float gl = dotNV * sqrt( a2 + ( 1.0 - a2 ) * pow2( dotNL ) );
return 0.5 / max( gv + gl, EPSILON );
}
float D_GGX( const in float alpha, const in float dotNH ) {
float a2 = pow2( alpha );
float denom = pow2( dotNH ) * ( a2 - 1.0 ) + 1.0;
return RECIPROCAL_PI * a2 / pow2( denom );
}
vec3 BRDF_Specular_GGX( const in IncidentLight incidentLight, const in GeometricContext geometry, const in vec3 specularColor, const in float roughness ) {
float alpha = pow2( roughness );
vec3 halfDir = normalize( incidentLight.direction + geometry.viewDir );
float dotNL = saturate( dot( geometry.normal, incidentLight.direction ) );
float dotNV = saturate( dot( geometry.normal, geometry.viewDir ) );
float dotNH = saturate( dot( geometry.normal, halfDir ) );
float dotLH = saturate( dot( incidentLight.direction, halfDir ) );
vec3 F = F_Schlick( specularColor, dotLH );
float G = G_GGX_SmithCorrelated( alpha, dotNL, dotNV );
float D = D_GGX( alpha, dotNH );
return F * ( G * D );
}
vec2 LTC_Uv( const in vec3 N, const in vec3 V, const in float roughness ) {
const float LUT_SIZE = 64.0;
const float LUT_SCALE = ( LUT_SIZE - 1.0 ) / LUT_SIZE;
const float LUT_BIAS = 0.5 / LUT_SIZE;
float dotNV = saturate( dot( N, V ) );
vec2 uv = vec2( roughness, sqrt( 1.0 - dotNV ) );
uv = uv * LUT_SCALE + LUT_BIAS;
return uv;
}
float LTC_ClippedSphereFormFactor( const in vec3 f ) {
float l = length( f );
return max( ( l * l + f.z ) / ( l + 1.0 ), 0.0 );
}
vec3 LTC_EdgeVectorFormFactor( const in vec3 v1, const in vec3 v2 ) {
float x = dot( v1, v2 );
float y = abs( x );
float a = 0.8543985 + ( 0.4965155 + 0.0145206 * y ) * y;
float b = 3.4175940 + ( 4.1616724 + y ) * y;
float v = a / b;
float theta_sintheta = ( x > 0.0 ) ? v : 0.5 * inversesqrt( max( 1.0 - x * x, 1e-7 ) ) - v;
return cross( v1, v2 ) * theta_sintheta;
}
vec3 LTC_Evaluate( const in vec3 N, const in vec3 V, const in vec3 P, const in mat3 mInv, const in vec3 rectCoords[ 4 ] ) {
vec3 v1 = rectCoords[ 1 ] - rectCoords[ 0 ];
vec3 v2 = rectCoords[ 3 ] - rectCoords[ 0 ];
vec3 lightNormal = cross( v1, v2 );
if( dot( lightNormal, P - rectCoords[ 0 ] ) < 0.0 ) return vec3( 0.0 );
vec3 T1, T2;
T1 = normalize( V - N * dot( V, N ) );
T2 = - cross( N, T1 );
mat3 mat = mInv * transposeMat3( mat3( T1, T2, N ) );
vec3 coords[ 4 ];
coords[ 0 ] = mat * ( rectCoords[ 0 ] - P );
coords[ 1 ] = mat * ( rectCoords[ 1 ] - P );
coords[ 2 ] = mat * ( rectCoords[ 2 ] - P );
coords[ 3 ] = mat * ( rectCoords[ 3 ] - P );
coords[ 0 ] = normalize( coords[ 0 ] );
coords[ 1 ] = normalize( coords[ 1 ] );
coords[ 2 ] = normalize( coords[ 2 ] );
coords[ 3 ] = normalize( coords[ 3 ] );
vec3 vectorFormFactor = vec3( 0.0 );
vectorFormFactor += LTC_EdgeVectorFormFactor( coords[ 0 ], coords[ 1 ] );
vectorFormFactor += LTC_EdgeVectorFormFactor( coords[ 1 ], coords[ 2 ] );
vectorFormFactor += LTC_EdgeVectorFormFactor( coords[ 2 ], coords[ 3 ] );
vectorFormFactor += LTC_EdgeVectorFormFactor( coords[ 3 ], coords[ 0 ] );
float result = LTC_ClippedSphereFormFactor( vectorFormFactor );
return vec3( result );
}
vec3 BRDF_Specular_GGX_Environment( const in GeometricContext geometry, const in vec3 specularColor, const in float roughness ) {
float dotNV = saturate( dot( geometry.normal, geometry.viewDir ) );
vec2 brdf = integrateSpecularBRDF( dotNV, roughness );
return specularColor * brdf.x + brdf.y;
}
void BRDF_Specular_Multiscattering_Environment( const in GeometricContext geometry, const in vec3 specularColor, const in float roughness, inout vec3 singleScatter, inout vec3 multiScatter ) {
float dotNV = saturate( dot( geometry.normal, geometry.viewDir ) );
vec3 F = F_Schlick( specularColor, dotNV );
vec2 brdf = integrateSpecularBRDF( dotNV, roughness );
vec3 FssEss = F * brdf.x + brdf.y;
float Ess = brdf.x + brdf.y;
float Ems = 1.0 - Ess;
vec3 Favg = specularColor + ( 1.0 - specularColor ) * 0.047619;
vec3 Fms = FssEss * Favg / ( 1.0 - Ems * Favg );
singleScatter += FssEss;
multiScatter += Fms * Ems;
}
float G_BlinnPhong_Implicit( ) {
return 0.25;
}
float D_BlinnPhong( const in float shininess, const in float dotNH ) {
return RECIPROCAL_PI * ( shininess * 0.5 + 1.0 ) * pow( dotNH, shininess );
}
vec3 BRDF_Specular_BlinnPhong( const in IncidentLight incidentLight, const in GeometricContext geometry, const in vec3 specularColor, const in float shininess ) {
vec3 halfDir = normalize( incidentLight.direction + geometry.viewDir );
float dotNH = saturate( dot( geometry.normal, halfDir ) );
float dotLH = saturate( dot( incidentLight.direction, halfDir ) );
vec3 F = F_Schlick( specularColor, dotLH );
float G = G_BlinnPhong_Implicit( );
float D = D_BlinnPhong( shininess, dotNH );
return F * ( G * D );
}
float GGXRoughnessToBlinnExponent( const in float ggxRoughness ) {
return ( 2.0 / pow2( ggxRoughness + 0.0001 ) - 2.0 );
}
float BlinnExponentToGGXRoughness( const in float blinnExponent ) {
return sqrt( 2.0 / ( blinnExponent + 2.0 ) );
}
#ifdef ENVMAP_TYPE_CUBE_UV
#define cubeUV_textureSize (1024.0)
int getFaceFromDirection(vec3 direction) {
vec3 absDirection = abs(direction);
int face = -1;
if( absDirection.x > absDirection.z ) {
if(absDirection.x > absDirection.y )
face = direction.x > 0.0 ? 0 : 3;
else
face = direction.y > 0.0 ? 1 : 4;
}
else {
if(absDirection.z > absDirection.y )
face = direction.z > 0.0 ? 2 : 5;
else
face = direction.y > 0.0 ? 1 : 4;
}
return face;
}
#define cubeUV_maxLods1 (log2(cubeUV_textureSize*0.25) - 1.0)
#define cubeUV_rangeClamp (exp2((6.0 - 1.0) * 2.0))
vec2 MipLevelInfo( vec3 vec, float roughnessLevel, float roughness ) {
float scale = exp2(cubeUV_maxLods1 - roughnessLevel);
float dxRoughness = dFdx(roughness);
float dyRoughness = dFdy(roughness);
vec3 dx = dFdx( vec * scale * dxRoughness );
vec3 dy = dFdy( vec * scale * dyRoughness );
float d = max( dot( dx, dx ), dot( dy, dy ) );
d = clamp(d, 1.0, cubeUV_rangeClamp);
float mipLevel = 0.5 * log2(d);
return vec2(floor(mipLevel), fract(mipLevel));
}
#define cubeUV_maxLods2 (log2(cubeUV_textureSize*0.25) - 2.0)
#define cubeUV_rcpTextureSize (1.0 / cubeUV_textureSize)
vec2 getCubeUV(vec3 direction, float roughnessLevel, float mipLevel) {
mipLevel = roughnessLevel > cubeUV_maxLods2 - 3.0 ? 0.0 : mipLevel;
float a = 16.0 * cubeUV_rcpTextureSize;
vec2 exp2_packed = exp2( vec2( roughnessLevel, mipLevel ) );
vec2 rcp_exp2_packed = vec2( 1.0 ) / exp2_packed;
float powScale = exp2_packed.x * exp2_packed.y;
float scale = rcp_exp2_packed.x * rcp_exp2_packed.y * 0.25;
float mipOffset = 0.75*(1.0 - rcp_exp2_packed.y) * rcp_exp2_packed.x;
bool bRes = mipLevel == 0.0;
scale = bRes && (scale < a) ? a : scale;
vec3 r;
vec2 offset;
int face = getFaceFromDirection(direction);
float rcpPowScale = 1.0 / powScale;
if( face == 0) {
r = vec3(direction.x, -direction.z, direction.y);
offset = vec2(0.0+mipOffset, 0.75 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? a : offset.y;
}
else if( face == 1) {
r = vec3(direction.y, direction.x, direction.z);
offset = vec2(scale+mipOffset, 0.75 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? a : offset.y;
}
else if( face == 2) {
r = vec3(direction.z, direction.x, direction.y);
offset = vec2(2.0*scale+mipOffset, 0.75 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? a : offset.y;
}
else if( face == 3) {
r = vec3(direction.x, direction.z, direction.y);
offset = vec2(0.0+mipOffset, 0.5 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? 0.0 : offset.y;
}
else if( face == 4) {
r = vec3(direction.y, direction.x, -direction.z);
offset = vec2(scale+mipOffset, 0.5 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? 0.0 : offset.y;
}
else {
r = vec3(direction.z, -direction.x, direction.y);
offset = vec2(2.0*scale+mipOffset, 0.5 * rcpPowScale);
offset.y = bRes && (offset.y < 2.0*a) ? 0.0 : offset.y;
}
r = normalize(r);
float texelOffset = 0.5 * cubeUV_rcpTextureSize;
vec2 s = ( r.yz / abs( r.x ) + vec2( 1.0 ) ) * 0.5;
vec2 base = offset + vec2( texelOffset );
return base + s * ( scale - 2.0 * texelOffset );
}
#define cubeUV_maxLods3 (log2(cubeUV_textureSize*0.25) - 3.0)
vec4 textureCubeUV( sampler2D envMap, vec3 reflectedDirection, float roughness ) {
float roughnessVal = roughness* cubeUV_maxLods3;
float r1 = floor(roughnessVal);
float r2 = r1 + 1.0;
float t = fract(roughnessVal);
vec2 mipInfo = MipLevelInfo(reflectedDirection, r1, roughness);
float s = mipInfo.y;
float level0 = mipInfo.x;
float level1 = level0 + 1.0;
level1 = level1 > 5.0 ? 5.0 : level1;
level0 += min( floor( s + 0.5 ), 5.0 );
vec2 uv_10 = getCubeUV(reflectedDirection, r1, level0);
vec4 color10 = envMapTexelToLinear(texture2D(envMap, uv_10));
vec2 uv_20 = getCubeUV(reflectedDirection, r2, level0);
vec4 color20 = envMapTexelToLinear(texture2D(envMap, uv_20));
vec4 result = mix(color10, color20, t);
return vec4(result.rgb, 1.0);
}
#endif
#if defined( USE_ENVMAP ) || defined( PHYSICAL )
uniform float reflectivity;
uniform float envMapIntensity;
#endif
#ifdef USE_ENVMAP
#if ! defined( PHYSICAL ) && ( defined( USE_BUMPMAP ) || defined( USE_NORMALMAP ) || defined( PHONG ) )
varying vec3 vWorldPosition;
#endif
#ifdef ENVMAP_TYPE_CUBE
uniform samplerCube envMap;
#else
uniform sampler2D envMap;
#endif
uniform float flipEnvMap;
uniform int maxMipLevel;
#if defined( USE_BUMPMAP ) || defined( USE_NORMALMAP ) || defined( PHONG ) || defined( PHYSICAL )
uniform float refractionRatio;
#else
varying vec3 vReflect;
#endif
#endif
#if defined( USE_ENVMAP ) && defined( PHYSICAL )
vec3 getLightProbeIndirectIrradiance( const in GeometricContext geometry, const in int maxMIPLevel ) {
vec3 worldNormal = inverseTransformDirection( geometry.normal, viewMatrix );
#ifdef ENVMAP_TYPE_CUBE
vec3 queryVec = vec3( flipEnvMap * worldNormal.x, worldNormal.yz );
#ifdef TEXTURE_LOD_EXT
vec4 envMapColor = textureCubeLodEXT( envMap, queryVec, float( maxMIPLevel ) );
#else
vec4 envMapColor = textureCube( envMap, queryVec, float( maxMIPLevel ) );
#endif
envMapColor.rgb = envMapTexelToLinear( envMapColor ).rgb;
#elif defined( ENVMAP_TYPE_CUBE_UV )
vec3 queryVec = vec3( flipEnvMap * worldNormal.x, worldNormal.yz );
vec4 envMapColor = textureCubeUV( envMap, queryVec, 1.0 );
#else
vec4 envMapColor = vec4( 0.0 );
#endif
return PI * envMapColor.rgb * envMapIntensity;
}
float getSpecularMIPLevel( const in float blinnShininessExponent, const in int maxMIPLevel ) {
float maxMIPLevelScalar = float( maxMIPLevel );
float desiredMIPLevel = maxMIPLevelScalar + 0.79248 - 0.5 * log2( pow2( blinnShininessExponent ) + 1.0 );
return clamp( desiredMIPLevel, 0.0, maxMIPLevelScalar );
}
vec3 getLightProbeIndirectRadiance( const in GeometricContext geometry, const in float blinnShininessExponent, const in int maxMIPLevel ) {
#ifdef ENVMAP_MODE_REFLECTION
vec3 reflectVec = reflect( -geometry.viewDir, geometry.normal );
#else
vec3 reflectVec = refract( -geometry.viewDir, geometry.normal, refractionRatio );
#endif
reflectVec = inverseTransformDirection( reflectVec, viewMatrix );
float specularMIPLevel = getSpecularMIPLevel( blinnShininessExponent, maxMIPLevel );
#ifdef ENVMAP_TYPE_CUBE
vec3 queryReflectVec = vec3( flipEnvMap * reflectVec.x, reflectVec.yz );
#ifdef TEXTURE_LOD_EXT
vec4 envMapColor = textureCubeLodEXT( envMap, queryReflectVec, specularMIPLevel );
#else
vec4 envMapColor = textureCube( envMap, queryReflectVec, specularMIPLevel );
#endif
envMapColor.rgb = envMapTexelToLinear( envMapColor ).rgb;
#elif defined( ENVMAP_TYPE_CUBE_UV )
vec3 queryReflectVec = vec3( flipEnvMap * reflectVec.x, reflectVec.yz );
vec4 envMapColor = textureCubeUV( envMap, queryReflectVec, BlinnExponentToGGXRoughness(blinnShininessExponent ));
#elif defined( ENVMAP_TYPE_EQUIREC )
vec2 sampleUV;
sampleUV.y = asin( clamp( reflectVec.y, - 1.0, 1.0 ) ) * RECIPROCAL_PI + 0.5;
sampleUV.x = atan( reflectVec.z, reflectVec.x ) * RECIPROCAL_PI2 + 0.5;
#ifdef TEXTURE_LOD_EXT
vec4 envMapColor = texture2DLodEXT( envMap, sampleUV, specularMIPLevel );
#else
vec4 envMapColor = texture2D( envMap, sampleUV, specularMIPLevel );
#endif
envMapColor.rgb = envMapTexelToLinear( envMapColor ).rgb;
#elif defined( ENVMAP_TYPE_SPHERE )
vec3 reflectView = normalize( ( viewMatrix * vec4( reflectVec, 0.0 ) ).xyz + vec3( 0.0, 0.0, 1.0 ) );
#ifdef TEXTURE_LOD_EXT
vec4 envMapColor = texture2DLodEXT( envMap, reflectView.xy * 0.5 + 0.5, specularMIPLevel );
#else
vec4 envMapColor = texture2D( envMap, reflectView.xy * 0.5 + 0.5, specularMIPLevel );
#endif
envMapColor.rgb = envMapTexelToLinear( envMapColor ).rgb;
#endif
return envMapColor.rgb * envMapIntensity;
}
#endif
#ifdef USE_FOG
uniform vec3 fogColor;
varying float fogDepth;
#ifdef FOG_EXP2
uniform float fogDensity;
#else
uniform float fogNear;
uniform float fogFar;
#endif
#endif
uniform vec3 ambientLightColor;
vec3 getAmbientLightIrradiance( const in vec3 ambientLightColor ) {
vec3 irradiance = ambientLightColor;
#ifndef PHYSICALLY_CORRECT_LIGHTS
irradiance *= PI;
#endif
return irradiance;
}
#if 1 > 0
struct DirectionalLight {
vec3 direction;
vec3 color;
int shadow;
float shadowBias;
float shadowRadius;
vec2 shadowMapSize;
};
uniform DirectionalLight directionalLights[ 1 ];
void getDirectionalDirectLightIrradiance( const in DirectionalLight directionalLight, const in GeometricContext geometry, out IncidentLight directLight ) {
directLight.color = directionalLight.color;
directLight.direction = directionalLight.direction;
directLight.visible = true;
}
#endif
#if 0 > 0
struct PointLight {
vec3 position;
vec3 color;
float distance;
float decay;
int shadow;
float shadowBias;
float shadowRadius;
vec2 shadowMapSize;
float shadowCameraNear;
float shadowCameraFar;
};
uniform PointLight pointLights[ 0 ];
void getPointDirectLightIrradiance( const in PointLight pointLight, const in GeometricContext geometry, out IncidentLight directLight ) {
vec3 lVector = pointLight.position - geometry.position;
directLight.direction = normalize( lVector );
float lightDistance = length( lVector );
directLight.color = pointLight.color;
directLight.color *= punctualLightIntensityToIrradianceFactor( lightDistance, pointLight.distance, pointLight.decay );
directLight.visible = ( directLight.color ! = vec3( 0.0 ) );
}
#endif
#if 0 > 0
struct SpotLight {
vec3 position;
vec3 direction;
vec3 color;
float distance;
float decay;
float coneCos;
float penumbraCos;
int shadow;
float shadowBias;
float shadowRadius;
vec2 shadowMapSize;
};
uniform SpotLight spotLights[ 0 ];
void getSpotDirectLightIrradiance( const in SpotLight spotLight, const in GeometricContext geometry, out IncidentLight directLight ) {
vec3 lVector = spotLight.position - geometry.position;
directLight.direction = normalize( lVector );
float lightDistance = length( lVector );
float angleCos = dot( directLight.direction, spotLight.direction );
if ( angleCos > spotLight.coneCos ) {
float spotEffect = smoothstep( spotLight.coneCos, spotLight.penumbraCos, angleCos );
directLight.color = spotLight.color;
directLight.color *= spotEffect * punctualLightIntensityToIrradianceFactor( lightDistance, spotLight.distance, spotLight.decay );
directLight.visible = true;
}
else {
directLight.color = vec3( 0.0 );
directLight.visible = false;
}
}
#endif
#if 0 > 0
struct RectAreaLight {
vec3 color;
vec3 position;
vec3 halfWidth;
vec3 halfHeight;
};
uniform sampler2D ltc_1;
uniform sampler2D ltc_2;
uniform RectAreaLight rectAreaLights[ 0 ];
#endif
#if 1 > 0
struct HemisphereLight {
vec3 direction;
vec3 skyColor;
vec3 groundColor;
};
uniform HemisphereLight hemisphereLights[ 1 ];
vec3 getHemisphereLightIrradiance( const in HemisphereLight hemiLight, const in GeometricContext geometry ) {
float dotNL = dot( geometry.normal, hemiLight.direction );
float hemiDiffuseWeight = 0.5 * dotNL + 0.5;
vec3 irradiance = mix( hemiLight.groundColor, hemiLight.skyColor, hemiDiffuseWeight );
#ifndef PHYSICALLY_CORRECT_LIGHTS
irradiance *= PI;
#endif
return irradiance;
}
#endif
struct PhysicalMaterial {
vec3 diffuseColor;
float specularRoughness;
vec3 specularColor;
#ifndef STANDARD
float clearCoat;
float clearCoatRoughness;
#endif
};
#define MAXIMUM_SPECULAR_COEFFICIENT 0.16
#define DEFAULT_SPECULAR_COEFFICIENT 0.04
float clearCoatDHRApprox( const in float roughness, const in float dotNL ) {
return DEFAULT_SPECULAR_COEFFICIENT + ( 1.0 - DEFAULT_SPECULAR_COEFFICIENT ) * ( pow( 1.0 - dotNL, 5.0 ) * pow( 1.0 - roughness, 2.0 ) );
}
#if 0 > 0
void RE_Direct_RectArea_Physical( const in RectAreaLight rectAreaLight, const in GeometricContext geometry, const in PhysicalMaterial material, inout ReflectedLight reflectedLight ) {
vec3 normal = geometry.normal;
vec3 viewDir = geometry.viewDir;
vec3 position = geometry.position;
vec3 lightPos = rectAreaLight.position;
vec3 halfWidth = rectAreaLight.halfWidth;
vec3 halfHeight = rectAreaLight.halfHeight;
vec3 lightColor = rectAreaLight.color;
float roughness = material.specularRoughness;
vec3 rectCoords[ 4 ];
rectCoords[ 0 ] = lightPos + halfWidth - halfHeight;
rectCoords[ 1 ] = lightPos - halfWidth - halfHeight;
rectCoords[ 2 ] = lightPos - halfWidth + halfHeight;
rectCoords[ 3 ] = lightPos + halfWidth + halfHeight;
vec2 uv = LTC_Uv( normal, viewDir, roughness );
vec4 t1 = texture2D( ltc_1, uv );
vec4 t2 = texture2D( ltc_2, uv );
mat3 mInv = mat3(
vec3( t1.x, 0, t1.y ), vec3( 0, 1, 0 ), vec3( t1.z, 0, t1.w )
);
vec3 fresnel = ( material.specularColor * t2.x + ( vec3( 1.0 ) - material.specularColor ) * t2.y );
reflectedLight.directSpecular += lightColor * fresnel * LTC_Evaluate( normal, viewDir, position, mInv, rectCoords );
reflectedLight.directDiffuse += lightColor * material.diffuseColor * LTC_Evaluate( normal, viewDir, position, mat3( 1.0 ), rectCoords );
}
#endif
void RE_Direct_Physical( const in IncidentLight directLight, const in GeometricContext geometry, const in PhysicalMaterial material, inout ReflectedLight reflectedLight ) {
float dotNL = saturate( dot( geometry.normal, directLight.direction ) );
vec3 irradiance = dotNL * directLight.color;
#ifndef PHYSICALLY_CORRECT_LIGHTS
irradiance *= PI;
#endif
#ifndef STANDARD
float clearCoatDHR = material.clearCoat * clearCoatDHRApprox( material.clearCoatRoughness, dotNL );
#else
float clearCoatDHR = 0.0;
#endif
reflectedLight.directSpecular += ( 1.0 - clearCoatDHR ) * irradiance * BRDF_Specular_GGX( directLight, geometry, material.specularColor, material.specularRoughness );
reflectedLight.directDiffuse += ( 1.0 - clearCoatDHR ) * irradiance * BRDF_Diffuse_Lambert( material.diffuseColor );
#ifndef STANDARD
reflectedLight.directSpecular += irradiance * material.clearCoat * BRDF_Specular_GGX( directLight, geometry, vec3( DEFAULT_SPECULAR_COEFFICIENT ), material.clearCoatRoughness );
#endif
}
void RE_IndirectDiffuse_Physical( const in vec3 irradiance, const in GeometricContext geometry, const in PhysicalMaterial material, inout ReflectedLight reflectedLight ) {
#ifndef ENVMAP_TYPE_CUBE_UV
reflectedLight.indirectDiffuse += irradiance * BRDF_Diffuse_Lambert( material.diffuseColor );
#endif
}
void RE_IndirectSpecular_Physical( const in vec3 radiance, const in vec3 irradiance, const in vec3 clearCoatRadiance, const in GeometricContext geometry, const in PhysicalMaterial material, inout ReflectedLight reflectedLight) {
#ifndef STANDARD
float dotNV = saturate( dot( geometry.normal, geometry.viewDir ) );
float dotNL = dotNV;
float clearCoatDHR = material.clearCoat * clearCoatDHRApprox( material.clearCoatRoughness, dotNL );
#else
float clearCoatDHR = 0.0;
#endif
float clearCoatInv = 1.0 - clearCoatDHR;
#if defined( ENVMAP_TYPE_CUBE_UV )
vec3 singleScattering = vec3( 0.0 );
vec3 multiScattering = vec3( 0.0 );
vec3 cosineWeightedIrradiance = irradiance * RECIPROCAL_PI;
BRDF_Specular_Multiscattering_Environment( geometry, material.specularColor, material.specularRoughness, singleScattering, multiScattering );
vec3 diffuse = material.diffuseColor;
reflectedLight.indirectSpecular += clearCoatInv * radiance * singleScattering;
reflectedLight.indirectDiffuse += multiScattering * cosineWeightedIrradiance;
reflectedLight.indirectDiffuse += diffuse * cosineWeightedIrradiance;
#else
reflectedLight.indirectSpecular += clearCoatInv * radiance * BRDF_Specular_GGX_Environment( geometry, material.specularColor, material.specularRoughness );
#endif
#ifndef STANDARD
reflectedLight.indirectSpecular += clearCoatRadiance * material.clearCoat * BRDF_Specular_GGX_Environment( geometry, vec3( DEFAULT_SPECULAR_COEFFICIENT ), material.clearCoatRoughness );
#endif
}
#define RE_Direct RE_Direct_Physical
#define RE_Direct_RectArea RE_Direct_RectArea_Physical
#define RE_IndirectDiffuse RE_IndirectDiffuse_Physical
#define RE_IndirectSpecular RE_IndirectSpecular_Physical
#define Material_BlinnShininessExponent( material ) GGXRoughnessToBlinnExponent( material.specularRoughness )
#define Material_ClearCoat_BlinnShininessExponent( material ) GGXRoughnessToBlinnExponent( material.clearCoatRoughness )
float computeSpecularOcclusion( const in float dotNV, const in float ambientOcclusion, const in float roughness ) {
return saturate( pow( dotNV + ambientOcclusion, exp2( - 16.0 * roughness - 1.0 ) ) - 1.0 + ambientOcclusion );
}
#ifdef USE_SHADOWMAP
#if 1 > 0
uniform sampler2D directionalShadowMap[ 1 ];
varying vec4 vDirectionalShadowCoord[ 1 ];
#endif
#if 0 > 0
uniform sampler2D spotShadowMap[ 0 ];
varying vec4 vSpotShadowCoord[ 0 ];
#endif
#if 0 > 0
uniform sampler2D pointShadowMap[ 0 ];
varying vec4 vPointShadowCoord[ 0 ];
#endif
float texture2DCompare( sampler2D depths, vec2 uv, float compare ) {
return step( compare, unpackRGBAToDepth( texture2D( depths, uv ) ) );
}
float texture2DShadowLerp( sampler2D depths, vec2 size, vec2 uv, float compare ) {
const vec2 offset = vec2( 0.0, 1.0 );
vec2 texelSize = vec2( 1.0 ) / size;
vec2 centroidUV = floor( uv * size + 0.5 ) / size;
float lb = texture2DCompare( depths, centroidUV + texelSize * offset.xx, compare );
float lt = texture2DCompare( depths, centroidUV + texelSize * offset.xy, compare );
float rb = texture2DCompare( depths, centroidUV + texelSize * offset.yx, compare );
float rt = texture2DCompare( depths, centroidUV + texelSize * offset.yy, compare );
vec2 f = fract( uv * size + 0.5 );
float a = mix( lb, lt, f.y );
float b = mix( rb, rt, f.y );
float c = mix( a, b, f.x );
return c;
}
float getShadow( sampler2D shadowMap, vec2 shadowMapSize, float shadowBias, float shadowRadius, vec4 shadowCoord ) {
float shadow = 1.0;
shadowCoord.xyz /= shadowCoord.w;
shadowCoord.z += shadowBias;
bvec4 inFrustumVec = bvec4 ( shadowCoord.x >= 0.0, shadowCoord.x <= 1.0, shadowCoord.y >= 0.0, shadowCoord.y <= 1.0 );
bool inFrustum = all( inFrustumVec );
bvec2 frustumTestVec = bvec2( inFrustum, shadowCoord.z <= 1.0 );
bool frustumTest = all( frustumTestVec );
if ( frustumTest ) {
#if defined( SHADOWMAP_TYPE_PCF )
vec2 texelSize = vec2( 1.0 ) / shadowMapSize;
float dx0 = - texelSize.x * shadowRadius;
float dy0 = - texelSize.y * shadowRadius;
float dx1 = + texelSize.x * shadowRadius;
float dy1 = + texelSize.y * shadowRadius;
shadow = (
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx0, dy0 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( 0.0, dy0 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx1, dy0 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx0, 0.0 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy, shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx1, 0.0 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx0, dy1 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( 0.0, dy1 ), shadowCoord.z ) +
texture2DCompare( shadowMap, shadowCoord.xy + vec2( dx1, dy1 ), shadowCoord.z )
) * ( 1.0 / 9.0 );
#elif defined( SHADOWMAP_TYPE_PCF_SOFT )
vec2 texelSize = vec2( 1.0 ) / shadowMapSize;
float dx0 = - texelSize.x * shadowRadius;
float dy0 = - texelSize.y * shadowRadius;
float dx1 = + texelSize.x * shadowRadius;
float dy1 = + texelSize.y * shadowRadius;
shadow = (
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx0, dy0 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( 0.0, dy0 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx1, dy0 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx0, 0.0 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy, shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx1, 0.0 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx0, dy1 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( 0.0, dy1 ), shadowCoord.z ) +
texture2DShadowLerp( shadowMap, shadowMapSize, shadowCoord.xy + vec2( dx1, dy1 ), shadowCoord.z )
) * ( 1.0 / 9.0 );
#else
shadow = texture2DCompare( shadowMap, shadowCoord.xy, shadowCoord.z );
#endif
}
return shadow;
}
vec2 cubeToUV( vec3 v, float texelSizeY ) {
vec3 absV = abs( v );
float scaleToCube = 1.0 / max( absV.x, max( absV.y, absV.z ) );
absV *= scaleToCube;
v *= scaleToCube * ( 1.0 - 2.0 * texelSizeY );
vec2 planar = v.xy;
float almostATexel = 1.5 * texelSizeY;
float almostOne = 1.0 - almostATexel;
if ( absV.z >= almostOne ) {
if ( v.z > 0.0 )
planar.x = 4.0 - v.x;
}
else if ( absV.x >= almostOne ) {
float signX = sign( v.x );
planar.x = v.z * signX + 2.0 * signX;
}
else if ( absV.y >= almostOne ) {
float signY = sign( v.y );
planar.x = v.x + 2.0 * signY + 2.0;
planar.y = v.z * signY - 2.0;
}
return vec2( 0.125, 0.25 ) * planar + vec2( 0.375, 0.75 );
}
float getPointShadow( sampler2D shadowMap, vec2 shadowMapSize, float shadowBias, float shadowRadius, vec4 shadowCoord, float shadowCameraNear, float shadowCameraFar ) {
vec2 texelSize = vec2( 1.0 ) / ( shadowMapSize * vec2( 4.0, 2.0 ) );
vec3 lightToPosition = shadowCoord.xyz;
float dp = ( length( lightToPosition ) - shadowCameraNear ) / ( shadowCameraFar - shadowCameraNear );
dp += shadowBias;
vec3 bd3D = normalize( lightToPosition );
#if defined( SHADOWMAP_TYPE_PCF ) || defined( SHADOWMAP_TYPE_PCF_SOFT )
vec2 offset = vec2( - 1, 1 ) * shadowRadius * texelSize.y;
return (
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.xyy, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.yyy, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.xyx, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.yyx, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.xxy, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.yxy, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.xxx, texelSize.y ), dp ) +
texture2DCompare( shadowMap, cubeToUV( bd3D + offset.yxx, texelSize.y ), dp )
) * ( 1.0 / 9.0 );
#else
return texture2DCompare( shadowMap, cubeToUV( bd3D, texelSize.y ), dp );
#endif
}
#endif
#ifdef USE_BUMPMAP
uniform sampler2D bumpMap;
uniform float bumpScale;
vec2 dHdxy_fwd() {
vec2 dSTdx = dFdx( vUv );
vec2 dSTdy = dFdy( vUv );
float Hll = bumpScale * texture2D( bumpMap, vUv ).x;
float dBx = bumpScale * texture2D( bumpMap, vUv + dSTdx ).x - Hll;
float dBy = bumpScale * texture2D( bumpMap, vUv + dSTdy ).x - Hll;
return vec2( dBx, dBy );
}
vec3 perturbNormalArb( vec3 surf_pos, vec3 surf_norm, vec2 dHdxy ) {
vec3 vSigmaX = vec3( dFdx( surf_pos.x ), dFdx( surf_pos.y ), dFdx( surf_pos.z ) );
vec3 vSigmaY = vec3( dFdy( surf_pos.x ), dFdy( surf_pos.y ), dFdy( surf_pos.z ) );
vec3 vN = surf_norm;
vec3 R1 = cross( vSigmaY, vN );
vec3 R2 = cross( vN, vSigmaX );
float fDet = dot( vSigmaX, R1 );
fDet *= ( float( gl_FrontFacing ) * 2.0 - 1.0 );
vec3 vGrad = sign( fDet ) * ( dHdxy.x * R1 + dHdxy.y * R2 );
return normalize( abs( fDet ) * surf_norm - vGrad );
}
#endif
#ifdef USE_NORMALMAP
uniform sampler2D normalMap;
uniform vec2 normalScale;
#ifdef OBJECTSPACE_NORMALMAP
uniform mat3 normalMatrix;
#else
vec3 perturbNormal2Arb( vec3 eye_pos, vec3 surf_norm ) {
vec3 q0 = vec3( dFdx( eye_pos.x ), dFdx( eye_pos.y ), dFdx( eye_pos.z ) );
vec3 q1 = vec3( dFdy( eye_pos.x ), dFdy( eye_pos.y ), dFdy( eye_pos.z ) );
vec2 st0 = dFdx( vUv.st );
vec2 st1 = dFdy( vUv.st );
float scale = sign( st1.t * st0.s - st0.t * st1.s );
vec3 S = normalize( ( q0 * st1.t - q1 * st0.t ) * scale );
vec3 T = normalize( ( - q0 * st1.s + q1 * st0.s ) * scale );
vec3 N = normalize( surf_norm );
mat3 tsn = mat3( S, T, N );
vec3 mapN = texture2D( normalMap, vUv ).xyz * 2.0 - 1.0;
mapN.xy *= normalScale;
mapN.xy *= ( float( gl_FrontFacing ) * 2.0 - 1.0 );
return normalize( tsn * mapN );
}
#endif
#endif
#ifdef USE_ROUGHNESSMAP
uniform sampler2D roughnessMap;
#endif
#ifdef USE_METALNESSMAP
uniform sampler2D metalnessMap;
#endif
#if defined( USE_LOGDEPTHBUF ) && defined( USE_LOGDEPTHBUF_EXT )
uniform float logDepthBufFC;
varying float vFragDepth;
#endif
#if 0 > 0
#if ! defined( PHYSICAL ) && ! defined( PHONG ) && ! defined( MATCAP )
varying vec3 vViewPosition;
#endif
uniform vec4 clippingPlanes[ 0 ];
#endif
void main() {
#if 0 > 0
vec4 plane;
#if 0 < 0
bool clipped = true;
if ( clipped ) discard;
#endif
#endif
vec4 diffuseColor = vec4( diffuse, opacity );
ReflectedLight reflectedLight = ReflectedLight( vec3( 0.0 ), vec3( 0.0 ), vec3( 0.0 ), vec3( 0.0 ) );
vec3 totalEmissiveRadiance = emissive;
#if defined( USE_LOGDEPTHBUF ) && defined( USE_LOGDEPTHBUF_EXT )
gl_FragDepthEXT = log2( vFragDepth ) * logDepthBufFC * 0.5;
#endif
#ifdef USE_MAP
vec4 texelColor = texture2D( map, vUv );
texelColor = mapTexelToLinear( texelColor );
diffuseColor *= texelColor;
#endif
#ifdef USE_COLOR
diffuseColor.rgb *= vColor;
#endif
#ifdef USE_ALPHAMAP
diffuseColor.a *= texture2D( alphaMap, vUv ).g;
#endif
#ifdef ALPHATEST
if ( diffuseColor.a < ALPHATEST ) discard;
#endif
float roughnessFactor = roughness;
#ifdef USE_ROUGHNESSMAP
vec4 texelRoughness = texture2D( roughnessMap, vUv );
roughnessFactor *= texelRoughness.g;
#endif
float metalnessFactor = metalness;
#ifdef USE_METALNESSMAP
vec4 texelMetalness = texture2D( metalnessMap, vUv );
metalnessFactor *= texelMetalness.b;
#endif
#ifdef FLAT_SHADED
vec3 fdx = vec3( dFdx( vViewPosition.x ), dFdx( vViewPosition.y ), dFdx( vViewPosition.z ) );
vec3 fdy = vec3( dFdy( vViewPosition.x ), dFdy( vViewPosition.y ), dFdy( vViewPosition.z ) );
vec3 normal = normalize( cross( fdx, fdy ) );
#else
vec3 normal = normalize( vNormal );
#ifdef DOUBLE_SIDED
normal = normal * ( float( gl_FrontFacing ) * 2.0 - 1.0 );
#endif
#ifdef USE_TANGENT
vec3 tangent = normalize( vTangent );
vec3 bitangent = normalize( vBitangent );
#ifdef DOUBLE_SIDED
tangent = tangent * ( float( gl_FrontFacing ) * 2.0 - 1.0 );
bitangent = bitangent * ( float( gl_FrontFacing ) * 2.0 - 1.0 );
#endif
#endif
#endif
#ifdef USE_NORMALMAP
#ifdef OBJECTSPACE_NORMALMAP
normal = texture2D( normalMap, vUv ).xyz * 2.0 - 1.0;
#ifdef FLIP_SIDED
normal = - normal;
#endif
#ifdef DOUBLE_SIDED
normal = normal * ( float( gl_FrontFacing ) * 2.0 - 1.0 );
#endif
normal = normalize( normalMatrix * normal );
#else
#ifdef USE_TANGENT
mat3 vTBN = mat3( tangent, bitangent, normal );
vec3 mapN = texture2D( normalMap, vUv ).xyz * 2.0 - 1.0;
mapN.xy = normalScale * mapN.xy;
normal = normalize( vTBN * mapN );
#else
normal = perturbNormal2Arb( -vViewPosition, normal );
#endif
#endif
#elif defined( USE_BUMPMAP )
normal = perturbNormalArb( -vViewPosition, normal, dHdxy_fwd() );
#endif
#ifdef USE_EMISSIVEMAP
vec4 emissiveColor = texture2D( emissiveMap, vUv );
emissiveColor.rgb = emissiveMapTexelToLinear( emissiveColor ).rgb;
totalEmissiveRadiance *= emissiveColor.rgb;
#endif
PhysicalMaterial material;
material.diffuseColor = diffuseColor.rgb * ( 1.0 - metalnessFactor );
material.specularRoughness = clamp( roughnessFactor, 0.04, 1.0 );
#ifdef STANDARD
material.specularColor = mix( vec3( DEFAULT_SPECULAR_COEFFICIENT ), diffuseColor.rgb, metalnessFactor );
#else
material.specularColor = mix( vec3( MAXIMUM_SPECULAR_COEFFICIENT * pow2( reflectivity ) ), diffuseColor.rgb, metalnessFactor );
material.clearCoat = saturate( clearCoat );
material.clearCoatRoughness = clamp( clearCoatRoughness, 0.04, 1.0 );
#endif
GeometricContext geometry;
geometry.position = - vViewPosition;
geometry.normal = normal;
geometry.viewDir = normalize( vViewPosition );
IncidentLight directLight;
#if ( 0 > 0 ) && defined( RE_Direct )
PointLight pointLight;
#endif
#if ( 0 > 0 ) && defined( RE_Direct )
SpotLight spotLight;
#endif
#if ( 1 > 0 ) && defined( RE_Direct )
DirectionalLight directionalLight;
directionalLight = directionalLights[ 0 ];
getDirectionalDirectLightIrradiance( directionalLight, geometry, directLight );
#ifdef USE_SHADOWMAP
directLight.color *= all( bvec2( directionalLight.shadow, directLight.visible ) ) ? getShadow( directionalShadowMap[ 0 ], directionalLight.shadowMapSize, directionalLight.shadowBias, directionalLight.shadowRadius, vDirectionalShadowCoord[ 0 ] ) : 1.0;
#endif
RE_Direct( directLight, geometry, material, reflectedLight );
#endif
#if ( 0 > 0 ) && defined( RE_Direct_RectArea )
RectAreaLight rectAreaLight;
#endif
#if defined( RE_IndirectDiffuse )
vec3 irradiance = getAmbientLightIrradiance( ambientLightColor );
#if ( 1 > 0 )
irradiance += getHemisphereLightIrradiance( hemisphereLights[ 0 ], geometry );
#endif
#endif
#if defined( RE_IndirectSpecular )
vec3 radiance = vec3( 0.0 );
vec3 clearCoatRadiance = vec3( 0.0 );
#endif
#if defined( RE_IndirectDiffuse )
#ifdef USE_LIGHTMAP
vec3 lightMapIrradiance = texture2D( lightMap, vUv2 ).xyz * lightMapIntensity;
#ifndef PHYSICALLY_CORRECT_LIGHTS
lightMapIrradiance *= PI;
#endif
irradiance += lightMapIrradiance;
#endif
#if defined( USE_ENVMAP ) && defined( PHYSICAL ) && defined( ENVMAP_TYPE_CUBE_UV )
irradiance += getLightProbeIndirectIrradiance( geometry, maxMipLevel );
#endif
#endif
#if defined( USE_ENVMAP ) && defined( RE_IndirectSpecular )
radiance += getLightProbeIndirectRadiance( geometry, Material_BlinnShininessExponent( material ), maxMipLevel );
#ifndef STANDARD
clearCoatRadiance += getLightProbeIndirectRadiance( geometry, Material_ClearCoat_BlinnShininessExponent( material ), maxMipLevel );
#endif
#endif
#if defined( RE_IndirectDiffuse )
RE_IndirectDiffuse( irradiance, geometry, material, reflectedLight );
#endif
#if defined( RE_IndirectSpecular )
RE_IndirectSpecular( radiance, irradiance, clearCoatRadiance, geometry, material, reflectedLight );
#endif
#ifdef USE_AOMAP
float ambientOcclusion = ( texture2D( aoMap, vUv2 ).r - 1.0 ) * aoMapIntensity + 1.0;
reflectedLight.indirectDiffuse *= ambientOcclusion;
#if defined( USE_ENVMAP ) && defined( PHYSICAL )
float dotNV = saturate( dot( geometry.normal, geometry.viewDir ) );
reflectedLight.indirectSpecular *= computeSpecularOcclusion( dotNV, ambientOcclusion, material.specularRoughness );
#endif
#endif
vec3 outgoingLight = reflectedLight.directDiffuse + reflectedLight.indirectDiffuse + reflectedLight.directSpecular + reflectedLight.indirectSpecular + totalEmissiveRadiance;
gl_FragColor = vec4( outgoingLight, diffuseColor.a );
#if defined( TONE_MAPPING )
gl_FragColor.rgb = toneMapping( gl_FragColor.rgb );
#endif
gl_FragColor = linearToOutputTexel( gl_FragColor );
#ifdef USE_FOG
#ifdef FOG_EXP2
float fogFactor = whiteCompliment( exp2( - fogDensity * fogDensity * fogDepth * fogDepth * LOG2 ) );
#else
float fogFactor = smoothstep( fogNear, fogFar, fogDepth );
#endif
gl_FragColor.rgb = mix( gl_FragColor.rgb, fogColor, fogFactor );
#endif
#ifdef PREMULTIPLIED_ALPHA
gl_FragColor.rgb *= gl_FragColor.a;
#endif
#if defined( DITHERING )
gl_FragColor.rgb = dithering( gl_FragColor.rgb );
#endif
}