Hi there, I’ve been building a door configurator for a while now and for the whole time i stuck with a working door model for one specific thickness. Here is what i can build right now: [Tuereinschlag_stumpf_539B5277-721D-4615-AD7D-8B343988E7D5-609213392] Basically a boxGeometry for a flush door …

My last post in this thread, just for completeness: The previous demo was for procedurally fixed UVs. Of course, there are flaws, as UV mapping is art and sometimes it needs manual intervention. But for many cases automatic mapping is visually acceptable. Below is a completely different approach -…

The codesandbox is inaccessible. My expectation is that lips (with or without roundness) should be procedurally made-able. The following two quotes are something that I cannot visualize (I’m not familiar with door terminology), so: what is the basic shape, what is the top part, why lips on sides are…

Hey @PavelBoytchev , could you check if the codesandbox is working now? https://codesandbox.io/p/devbox/extrudeuv-forked-4ldgv3?workspaceId=ws_4upUUxh89pkkeLqW8ZvNPo i think through the codesandbox a lot of what i want to achieve gets clearer. But ill try to demonstrate it better and post again. …

So here are some images to explain my current idea a bit better. The process starts with a threejs shape (i made the images in Blender to demonstrate). In this case this would be a lipped door because of the overlap on the top. [TB_rework] What i want to do next is a extrusion of this shape. This…

Thanks. It is much more clear now. I have classes now, in 6-10 hours I will have a look. So you want a door with lips on some sides (not just 2, but more, e.g. left, right and top). And some lips have rounded fragments

Hey @PavelBoytchev , thanks for the support, take your time! In the mean time ill try some other approaches myself and provide them. So your understanding might get better of what i want to achieve. Have a good day sir, Tom

So, after spending some thinking time during the subway commute, I got several ideas. The easiest of them is to use miter cuts and join door lips as a picture frame. I tried with an imaginary lip profile, not realistic, but has positive and negative parts plus curves. https://codepen.io/boytchev/fu…

In addition to the great techniques presented so far.. I’m gonna throw in my vote for the technique you mentioned initially, using the basic extrusion, then some CSG for the custom bits, like bevels, mitre, cutouts. That way, adding new cutouts etc, is mostly reduced to generating the cutting geomet…

I like that approach a lot because it is very near to the real world on building a door Leaf. But in the real world you would not use this 45 degree cut in the corners between the horizontal and vertical elements. Here is how it would be done in the real world: front surface thin layer that has th…

Thats a great point actually!! For most doors that would work. With that in mind i could actually create the real structure of the door and use Pavels approach not for the lip but for the cutter that shapes the lip. This would also have the problem, that i could not create different lips for left a…

Create a procedural door model

Questions

prisoner849 September 24, 2025, 10:48am 7

Maybe this topic will be helpful: ProfiledContourGeometry MultiMaterial
As you want to have complex profiles

Topic		Replies	Views
Wall building in a level-editor Questions geometry	37	11753	July 15, 2024
ProfiledContourGeometry MultiMaterial Resources materials , buffergeometry	16	6172	January 30, 2023
Problems applying texture to Extruded Geometry Questions textures , materials , geometry	5	1937	September 16, 2021
How to create a wall? Questions geometry	9	8394	July 9, 2024
Round-edged box flat Resources textures , uv-mapping , geometry	12	1829	August 19, 2024

Create a procedural door model

Related topics